Build a Dog Ramp Out of Plywood

Build a Dog Ramp Out of Plywood

By Johanna Soliday

Before you start, consider the following:

* How big and how heavy is your dog?
* How often will you need to move the ramp?
* How wide do you want your ramp to be?
* Is there a chance that humans will use the ramp too?
* How many ramps will you need?

For a dog or humans over 100 lbs, you may need 3/8 or 1/2 inch plywood; otherwise you can use 1/4 inch plywood.

If the ramp is to be moved frequently, you will most likely want as light a ramp as possible. The recommended width is between 16 and 24 inches.


* Plywood (for length see Instructions below)
* Indoor-outdoor carpeting to cover one side of the plywood
* 4 strips of wooden lathe, each piece as long as the ramp’s width
* Wood or drywall screws


* Measure the distance from the top of the stairs to the bottom
* Add 4 inches
* This will determine the length of the plywood and carpeting
* Cut the plywood
* Staple or glue the carpeting to the top side of the plywood
* Starting from the bottom, screw the lathe crosswise over the carpeting at regular intervals, for example every 10 or 12 inches
* Place the ramp over the steps and let your dog try it
* If the ramp is too steep, add another two feet of plywood and try again (screw a piece of board underneath the two sections to join them)
* Once your dog can use the ramp, move it to where you want it, then anchor the top end to the stairs with screws or nails
* Make sure nothing pokes out to hurt your dog’s paws
* If your steps are made of cement, use concrete anchors or concrete nails for fastening

Congratulations, that’s all there is to building a dog ramp out of plywood!

Jo Soliday is indebted to her friend, Ruth, for the instructions for this dog ramp. Ruth’s 17-year-old Lab has been using such ramps for years. For more ideas on dog ramps or making things for dogs, visit Jo’s website at

Article Source:

Related Posts Plugin for WordPress, Blogger...
Please follow and like us:
Visit Us
Follow Me
Follow by Email

Follow hart 1-800-hart:
call HART crazy .. but you either like something or you don't - HART likes everything and everybody! Well, except Asparagus.

5 Responses

    | Reply

    i think ther id no need for thewe instructions because making a dog ramp is soooo much easier then this!

  2. Jean
    | Reply

    KOURTNEY… Learn to spell correctly.

  3. Jean
    | Reply

    Jean…learn to mind your own beeze waxxe

  4. cctv hard drive
    | Reply

    Good day I am so glad I found your website, I really found
    you by error, while I was browsing on Askjeeve for something else, Anyhow I am here now
    and would just like to say thanks a lot for
    a marvelous post and a all round entertaining blog (I also love the theme/design), I
    don’t have time to look over it all at the moment but I have bookmarked it and also added your RSS feeds, so when I have time I
    will be back to read much more, Please do keep up the superb job.

    Also visit my weblog … cctv hard drive

  5. Pipe-Lining
    | Reply

    Whenever you do the job at an onshore organization you will probably be trained to use the equipment safely and study how you can oil rigs
    work. To summarize what we have gathered from these ten of
    the companies with considerable potential as the
    worst places to work, we can surmise that a company’s financial stability can
    be affected by. In spite of the recession, entry-level offshore oil rig
    jobs are still available.

Leave a Reply to Jean Cancel reply

Your email address will not be published. Required fields are marked *